- Home
- Hot Deals Store
- Home & Kitchen
- Home Improvement
- Home Sanitation
- Product Code: 12612266
-
More from:
Branded
Branded
Fall resistant tape at your reach now!
It is an innovative way to avoid slipping and fall accidents. The tape can be easily cut to size and applied to any surface. Moreover, it provides extra foot traction for protection, where slippery surface conditions may occur. It also helps to reduce the risk of slips, trips, falls, especially for elders, pregnant woman and patients.
-
Highlights:
- Provides a non-slip surface
- Durable and long lasting
- Heavy duty traction for steps
- Self-adhesive tape
- Outdoor and indoor use
- Type: Anti Slip & Skid Resistant Tape
- Tape Surface: Heavy duty traction for steps
- Installation: Self Adhesive Tape
- Ideal to apply on: Metal, Wood, Tiles, Marble, Granite, Cement, or maybe Painted Steps
- Length: 5 Meters
- Width: 50 mm
- Prepare the surface. The surface should be clean, dry, and free of dirt, dust, grease, and oil. If the surface is dirty, clean it with a mild detergent and water. If the surface is greasy or oily, clean it with a degreaser.
- Measure the tape. Measure the area where you want to apply the tape. Cut the tape to size, leaving a few extra inches on all sides.
- Peel the backing paper. Peel the backing paper from one end of the tape.
- Apply the tape. Press the tape firmly in place, starting at one end and working your way to the other.
- Smooth out the tape. Use a rubber roller or your fingers to smooth out any air bubbles or wrinkles in the tape.
- Trim the excess tape. Trim off any excess tape with a sharp utility knife.
- Do not apply the tape over cracks or holes in the surface. This could weaken the tape and make it more likely to peel or tear.
- Do not apply the tape over a surface that is not smooth. This could cause the tape to peel or tear.
- Do not apply the tape in direct sunlight. This could cause the adhesive to weaken.
- Do not apply the tape in extreme temperatures. This could also cause the adhesive to weaken.
- Do not use the tape if it is damaged or worn. This could make it less effective at preventing slips and falls.
- If the tape becomes damaged or worn, it should be replaced immediately.
- The tape should be used in areas where there is a risk of slips and falls, such as stairs, walkways, and floors.
- The tape should be inspected regularly for damage or wear and replaced as needed.
Features:
How to Apply?
Instructions:
Anti Skid Safety Tape
-
Seller: Aarav Trading Co Delhi DS
ⓘ
More Sellers - Add in Wishlist Please click to add in your Wishlist.
- 43%
-
M.R.P. :
700399 + 101 Shipping(incl. of all taxes)Free Shipping for Diamond Members
-
Call 0120-678-7424 to Order
- COD Available
-
Know availability at your location
Check
- Warranty: 48 Hrs Seller Warranty Against Manufacturing Defects
Fall resistant tape at your reach now!
It is an innovative way to avoid slipping and fall accidents. The tape can be easily cut to size and applied to any surface. Moreover, it provides extra foot traction for protection, where slippery surface conditions may occur. It also helps to reduce the risk of slips, trips, falls, especially for elders, pregnant woman and patients.
-
Highlights:
- Provides a non-slip surface
- Durable and long lasting
- Heavy duty traction for steps
- Self-adhesive tape
- Outdoor and indoor use
- Type: Anti Slip & Skid Resistant Tape
- Tape Surface: Heavy duty traction for steps
- Installation: Self Adhesive Tape
- Ideal to apply on: Metal, Wood, Tiles, Marble, Granite, Cement, or maybe Painted Steps
- Length: 5 Meters
- Width: 50 mm
- Prepare the surface. The surface should be clean, dry, and free of dirt, dust, grease, and oil. If the surface is dirty, clean it with a mild detergent and water. If the surface is greasy or oily, clean it with a degreaser.
- Measure the tape. Measure the area where you want to apply the tape. Cut the tape to size, leaving a few extra inches on all sides.
- Peel the backing paper. Peel the backing paper from one end of the tape.
- Apply the tape. Press the tape firmly in place, starting at one end and working your way to the other.
- Smooth out the tape. Use a rubber roller or your fingers to smooth out any air bubbles or wrinkles in the tape.
- Trim the excess tape. Trim off any excess tape with a sharp utility knife.
- Do not apply the tape over cracks or holes in the surface. This could weaken the tape and make it more likely to peel or tear.
- Do not apply the tape over a surface that is not smooth. This could cause the tape to peel or tear.
- Do not apply the tape in direct sunlight. This could cause the adhesive to weaken.
- Do not apply the tape in extreme temperatures. This could also cause the adhesive to weaken.
- Do not use the tape if it is damaged or worn. This could make it less effective at preventing slips and falls.
- If the tape becomes damaged or worn, it should be replaced immediately.
- The tape should be used in areas where there is a risk of slips and falls, such as stairs, walkways, and floors.
- The tape should be inspected regularly for damage or wear and replaced as needed.
Features:
How to Apply?
Instructions:
Package Contents:
Country of Origin:
India
Disclaimer: Product shown in the picture above is only for representative and information purposes. The actual product delivered may be different from the creative as displayed here in the website.
Anti Skid Safety Tape
Price in India: M.R.P. : 700399 + 101 Shipping
Specifications of: Anti Skid Safety Tape
- Product Type
- Anti Slip & Skid Resistant Tape
Main Feature
Other Features
- Additional Features
- Self Adhesive Tape
- Dimension
- 5 Meters long & 50 mm wide
General Features
Anti Skid Safety TapeVSFly Guard - Complete Protection f.. Anti Skid Safety Tape VS Fly Guard - Complete Protection f..
-
Ultra Sonic Pest Repellent - BOGO
1,000499
Anti Skid Safety TapeVSUltra Sonic Pest Repellent - BOGO Anti Skid Safety Tape VS Ultra Sonic Pest Repellent - BOGO